Soot Blowers


We have been Certified by Engineers India Limited (EIL) Six years back, In an Industrial Boiler to clean, soot/ ash/ slag accumulation on the surface of coils/ tubes results in the reduction of heat transfer. Soot deposition can also erode and corrode metal surfaces. It is necessary to remove this accumulation daily in order to increase efficiency of Boiler and life of the tubes/ coils. Effective cleaning of soot is the most important aspect of any boiler performance. TRUST WELL SOOT BLOWERS uses Advance Design Spray Nozzles for effective cleaning using Steam jet energy.
Trust Well offers a complete range of Soot Blowers to suit various requirements of the Boiler for different temperature Zones. Trust Well has tailor-made solutions for cleaning Boiler Tubes/ Coils, which improves Boiler efficiency.

All Soot Blowers can be connected to PLC based Sequential Control Panel as per requirement of indoor/ outdoor conditions.



Trust Well Engineers India_Soot Blowers
Operation

Trust Well Engineers India_Soot Blowers

LONG RETRACTABLE SOOT BLOWERS (LRSB)

Function of long retractable soot blower (LRSB) is to remove soot deposited on coils/ tubes in High temperature zone (e.g.Superheater Coils)
Trust Well also has his its own IBR certifed Poppet Valve manufacturing and is provided on LRSB.

LONG RETRACTABLE SOOT BLOWERS (LRSB)

  • The lance tube with four/ two high-peformance nozzles is helically passed over the flue gas path.
  • The blowing process begins as soon as the nozzles have passed through the boiler/ heater wall.
  • Required superheated/ saturated steam with desired pressure cleans entire area in high temp zone.
  • The lance element travels the desired length with steam blowing and again retracts back in anticlockwise direction of rotation with steam blowing.
  • Travel length is controlled by 2 nos. heavy duty limit switches.


TYPE LONG RETRACTABLE SOOT BLOWER
Temp. Range Above 800 °C
Limit switch Mechanical contact heavy duty with Mechanical Stopper
Steam consumption – kg / hr 4535 Kg / Hr
Blowing pressure – Kg/cm 2 (recommended) 21 Kg/cm2 max
Lance tube speed m / min 2.7 Transverse, 2.6 Rotary
Discharge nozzle – size , nos., angle w.r.t lance tube Size 19 Ø x 12 Ø 4 Nos. - 90°
Effective blowing redius mm 2100
Type of mounting on wall Stationary type
Type of Operation Motorised
Size of Steam Inlet Connection 65 mm NB
Motor Rating HP As per Lance Tube length up to 3 HP max
Reducer Will be provided to match steam inlet size



Operation

Trust Well Engineers India_Soot Blowers
MOTORISED ROTARY SOOT BLOWER (MRSB)

SIDE VIEW OF MRSB
(LANCE ELEMENT INSIDE THE BOILER)
Trust Well Rotary Motorised Soot Blower is designed to remove Soot/ Ash/ Slag deposited on Tubes in Economizer as well as Boiler Tubes in low Temperature Zone (below 550 ℃C).
The lance Element remains inside Boiler/ Economizer for all the time.
Selection of Lance element is done according to flue gas Temperatures.



TYPE MOTORISED ROTARY SOOT BLOWER (MRSB)
Location Boiler Bank/ Economizer
Type Motorised
Gas Temperature °C less than 550
Length of lance Element mm Normally 6000 in one piece construction
Effective Cleaning Radius mm 1800
Blowing Angle ° Adjustable up to 360
Blowing medium Steam
Pressure Kg / cm2 (Recommended) 21 max
Blowing Time Min 3
Rotary Speed RPM 3
Size of Steam Inlet Connection 0.25
Motor Rating (HP) 0.25
Reducer Will be provided to match steam inlet size


WALL BLOWER / WALL DESLAGGER

  • Trust Well Wall Deslaggers designed to remove Soot/Ash/Slag deposited on Furnace Wall/Side Wall Tubes. The lance Element retracts and cleans Soot deposited on side wall/ furnace tubes.
  • The Wall Deslagger is mounted directly on the wall box. No external support is required. Trust Well Wall Deslagger construction is robust design to have very low maintenance. Tested and proven over years of experience.
  • In the event of power failure the Wall Deslagger can be operated manually using the crank handle supplied.
  • Required care is taken in Design of Wall Deslagger to ensure Highest Level of Personal safety.



TYPE SHORT RETRACTABLE WALL MOUNTING TYPE
Blowing Angle 360°
Effective Cleaning Radious mm 1800 mm
Steam Pressure (Recommended) 21 Kgs/ cm2 Max
Steam consumption kg/ hr 357 Kg/ Hr
Lance tube speed m/ min 2.7
Speed rpm 3
Operating Temperature Up to 1200 ℃
Poppet Valve Provided (I B R Certified)
Limit Switches Heavy Duty Linear Movement
Helical Movement With Motor & Gear Box
Nozzle Size & Angle Size 19 Ø x 12 Ø 4 Nos. - 70°
Type of Operation Motorised
Size of Steam Inlet Connection 65 mm NB
Motor Rating HP As per Lance Tube length up to 3 HP max
Reducer Will be provided to match steam inlet size


Compartmental type PLC based Soot blower control Panel

Trust Well Engineers India_Soot Blowers



Manufacturing Facilites

Fabrication, wiring & testing of PLC based control panels
Marshalling panel,
LT/HT MCC, VFD panel,
AMF panel, Lighting distribution panel, Local Instrument Enclosure (LIE)
MCCs are made for indoor & outdoor application. Non draw out type access. Single front & double front type construction.
Free standing, compartmental OR Non compartmental architecture, provided with vibration pads. The MCCs can be made with RAE standard or project specific.
Dust proof, weather proof, water proof panel available in IP-23, IP- 42, IP-52, IP-54, IP-65.

PLC BASED SEQUENTIAL CONTROL PANEL

OVERVIEW: Trust Well has extensive experience in the manufacturing of all type of soot blower control panels including PLC Panels, Switchgear panels, Flame Proof Panels.
The manufacturing facilities include:

DESIGN & DETAIL ENGINEERING- ELECTRICAL
  • Preparation of Single line diagrams, electrical schematics, electrical wiring diagrams, interface wiring drawings.
  • Preparation of electrical cable specifications & cable schedule, JB schedule.
  • Preparation of electrical cable routing & layout drawing, cable tray schedule.
  • Preparation of Bill of material & Bill of quantity of cable, cable trays & accessories.
  • Procurement support & supply of electrical equipment.

DESIGN, DEVELOPMENT & IMPLEMENTATIONS
  • Configuration and implementation of software systems Electrical engineering.
  • Integration of multiple PLCs from Soot blower panel with plant DCS system.
  • Application development for PLC, HMI, SCADA & DCS.
  • Implementation of software in devices & simulation.
  • On-site commissioning and training service of PLC.
  • On-site repair and maintenance service of PLC.
The PLC based Soot blower control panels are constructed for safe area application. The Control panels can be designed for Soot blowers to be mounted on Boilers, Heaters, waste heat boilers. We have manufactured & supplied PLC control panels with following PLCs.
  • GE make – Versamax modular & micro PLC
  • Modicon – QA003 & QA004
  • Rockwell – Micro-820, 850, Micro logics, Control logics, Compact logics
  • Siemens – S7-200, S7-400
  • Mitsubishi – FX, Q-plc
  • Schneider- M-340

Let us work towards your success

Join the team of winning people.
Contact Us